Category Archives: BMX Tech Tip

BMX Tech Tip: Budget Bottom Bracket Tool

Here’s a way to make a Bottom Bracket tool to press those bearings into place for only a few bucks. All you need is a long half inch bolt (over an inch wider than your bottom bracket), a couple of nuts (preferably with a flange – but not locking), two very large washers (a larger diameter than your bearings), and two smaller washers that match the nuts. It works great. Hit up your local hardware store.

BMX bike Bottom Bracket Bearing Press-In Tool

facebooktwittergoogle_plusredditpinterestmailby feather